Φόρτωση...

Miscellaneous

5 STARS

HeliTrim

HeliTrim is a simple plugin intended to make flying helicopters with regular, self centring joysticks easier. It allows you to bind three commands for trim: One is to set the trim, when you hold down this button, moving your stick won't move the cyclic allowing...

Σχετικά με το

HeliTrim is a simple plugin intended to make flying helicopters with regular, self centring joysticks easier.

It allows you to bind three commands for trim:

  • One is to set the trim, when you hold down this button, moving your stick won't move the cyclic allowing you to move your stick to the centre and relieve the control pressure. You can then release the button and the centre of your stick becomes whatever position the cyclic is at the moment the button is released.
  • Other two are to release the trim. One will instantly release the trim, making the centre of your stick match the centre of cyclic. Second will do so gradually while it is being pressed, allowing you to keep better control of helicopter or to release the trim only partially.

You can set the speed at which the gradual reset happens in the settings menu. So for example with the default 5 second setting, if you set the trim in a way where full forward cyclic is the centre on your stick, it will take 5 seconds of holding down the button to match the cyclic and joystick centres.

You can set the plugin to trim cyclic and/or anti torque pedals. By default only cyclic is active. For users with no hardware pedals turning on HeliTrim for anti torque pedals could be useful too. 
Also if you have no hardware pedals and are flying a helicopter with its own force trim simulation (like the Rotorsim EC135) you can turn on HeliTrim ONLY for the anti torque pedals.

Second option in the settings window allows you to make the HeliTrim reset buttons also reset the default trim to 0. (May not work with some addons)

You can save these settings to a file from the settings menu and they will be automatically loaded every time you start the simulator.

This plugin should work only when you fly with helicopters and have no effect on other types of aircraft. Regular X-Plane helicopter trim will still work so you can use both at the same time. It's been tested with the Rotorsim EC 135 which has similar system built in and both the built in system and the HeliTrim plugin seem to work correctly.

HeliTrim is compatible with both X-Plane 11 and 12.

INSTALLATION: Unzip HeliTrim into Resources\plugins folder.

 

The whole thing is open source under the "Unlicense" licence. https://github.com/POM57/HeliTrim

Details
Συμβατότητα
Κατηγορία
Miscellaneous
Αρχική έκδοση
October 12, 2022
Τελευταία ενημέρωση
1 month(s) ago — 1.4

Version

1.4

Μέγεθος αρχείου

13.78 MB

Downloads

533

Αυτό το αρχείο έχει ελεγχθεί για ιούς και είναι ασφαλές για λήψη.

Πληροφορίες αρχείου

Συνδρομητές
8
Αξιολόγηση
5/5.0 — Υπέροχα!
Status
Δεν έχει κατεβεί ακόμα
Οι σημερινές λήψεις
0

Υπέροχα!
Με βάση 1 βαθμολογίες
😢
0
θλιβερό
😠
0
θυμωμένος
😮
0
σοκαρισμένος
🙏
1
ευγνώμων
😂
0
διασκεδαστικό
😍
1
ερωτευμένος

Timeline

  • Ενημερώθηκε σε έκδοση 1.4

  • Ενημερώθηκε σε έκδοση 1.3

  • Ενημερώθηκε σε έκδοση 1.2.2

  • Ενημερώθηκε σε έκδοση 1.2.1

  • Ενημερώθηκε σε έκδοση 1.2

  • Ενημερώθηκε σε έκδοση 1.1

  • Initial File Release


Δικαιώματα

Άδεια φόρτωσης
Δεν επιτρέπεται σε καμία περίπτωση να μεταφορτώσετε αυτό το αρχείο σε άλλους ιστότοπους.

Άδεια τροποποίησης
Πρέπει να λάβετε πρώτα την άδειά μου πριν σας επιτραπεί να τροποποιήσετε ή να βελτιώσετε το αρχείο μου.

Άδεια μετατροπής
Δεν επιτρέπεται η μετατροπή αυτού του αρχείου σε καμία περίπτωση.

Άδεια χρήσης περιουσιακών στοιχείων
Πρέπει να λάβετε πρώτα την άδειά μου πριν σας επιτραπεί να χρησιμοποιήσετε στοιχεία του αρχείου μου.

© POM - All rights reserved. Απαγορεύεται οποιαδήποτε επαναφόρτωση ή αναδιανομή αυτού του αρχείου χωρίς την προηγούμενη γραπτή συγκατάθεση του συγγραφέα. Αυτό το Flight Simulator 2020 Mod δημιουργήθηκε από τον POM and shared in Utilities » Miscellaneous για το X-Plane 12.


6 Σχόλια

How is the trim button set? I open settings and I see 'X' in the fields that are active, but I do not see how to set the button I want to use for the trim. When I press a button on my joystick or throttle I do not see this in settings.

Sorry if I missed something obvious!

Will this work without problem in aircraft like the X-Trident B412 that has a trim setting already? Because I really like the gradual release feature and would rather use that over the default trim release.

image

FlightSimFlyer

1 year(s) ago / Ευχαριστήθηκε από POM57

Thank you! Long flights in the default R22 were tiring without this.

image

Fux911

1 year(s) ago / Ευχαριστήθηκε από POM57

Thank you for this slim and good plugin! Works like a charm 👍🏻


Roadmap
Αυτά τα αντικείμενα βρίσκονται επί του παρόντος στη λίστα και θα διεκπεραιωθούν σύντομα!
Backlog
Προτάσεις, σφάλματα και ιδέες για το μέλλον.

  • Version 1.4 February 16, 2024


    Updated to latest SASL to (hopefully) make it work on Apple silicon

    Plugin should now release overrides on exit thanks to typo fix by Jürgen Kloos.

  • Version 1.3 May 01, 2023

    Option to enable HeliTrim for the cyclic and the anti-torque pedals separately

  • Version 1.2.2 January 25, 2023

    Fixed bug where HeliTrim blocked trim for fixed wing aircraft

  • Version 1.2.1 January 25, 2023

    Stopped settings menu from appearing on startup

  • Version 1.2 January 25, 2023

    Added option to override default trim with HeliTrim
    Fixed trim reset rate not saving

  • Version 1.1 October 13, 2022

    Added option to reset default trim along with HeliTrim.

  • Ξεκίνησε October 12, 2022

    Η αρχική έκδοση αυτού του αρχείου μόλις κυκλοφόρησε. Καλώς ήρθατε!

Συχνές ερωτήσεις

Ερωτήσεις Βρείτε τη λύση σας εδώ.


Αρκετά άδειο εδώ.

Δωρεές

Αυτοί οι χρήστες έχουν δωρίσει POM57 για να συνεχίσει να φτιάχνει φοβερά πρόσθετα που όλοι μπορούν να απολαύσουν.

Εξαρτήσεις

These add-ons may be required or recommended to use.


Αρκετά άδειο εδώ.